Commscope ATC300-2000 Bedienungsanleitung
Stöbern Sie online oder laden Sie Bedienungsanleitung nach Kommunikation Commscope ATC300-2000 herunter. CommScope ATC300-2000 User Manual Benutzerhandbuch
- Seite / 214
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
ATC200-1000 & ATC300-1000/2000
Teletilt
®
Remote Control Variable
Electrical Downtilt System
Installation and User Guide
Bulletin 639544 • Revision L • August 2014
© 2014 CommScope Bulletin 639544
Notice: CommScope disclaims any liability or responsibility for the results of improper or unsafe installation, inspection, maintenance, or removal practices.
Aviso: CommScope no acepta ninguna obligación ni responsabilidad como resultado de prácticas incorrectas o peligrosas de instalación, inspección, mantenimiento o retiro.
Avis : CommScope décline toute responsabilité pour les conséquences de procédures d’installation, d’inspection, d’entretien ou de retrait incorrectes ou dangereuses.
Hinweis: CommScope lehnt jede Haftung oder Verantwortung für Schäden ab, die aufgrund unsachgemäßer Installation, Überprüfung, Wartung oder Demontage auftreten.
Atenção: A CommScope abdica do direito de toda responsabilidade pelos resultados de práticas inadequadas e sem segurança de instalação, inspeção, manutenção ou remoção.
Avvertenza: CommScope declina eventuali responsabilità derivanti dell’esecuzione di procedure di installazione, ispezione, manutenzione e smontaggio improprie o poco sicure.
CommScope
1100 CommScope Place SE P.O. Box 339, Hickory, NC 28603-0339
(828) 324-2200 (800) 982-1708
www.commscope.com/andrew
Customer Service 24 hours
North America: +1-800-255-1479, Option 1 (toll free)
Any country: +1-779-435-6500, Option 1
email: [email protected]
- Installation and User Guide 1
- Revision History 3
- ATC300-1000/2000 Teletilt 4
- Notices and Precautions 5
- Figure 1. ESD Wrist Strap 6
- Table of Contents 9
- RET System 10
- Initial Setup 15
- Section 1 17
- Power Connections: 22
- Suspend/Wake Modes 23
- 1.3 Actuator (Motor Drive) 26
- 1.4 Junction Boxes 27
- 1.5 Lightning Protection Unit 27
- Features/benefits include: 28
- Section 2 30
- Mounting Screws 31
- Chassis Grounding Connection 31
- 2.5 Controller Chassis Power 32
- Section 3 34
- (Figure 3-1) 35
- Figure 3-2 36
- 1. Click on New IP Info tab 37
- New IP backup file shown 40
- 1. Click on Close 41
- 1. Select the backup file 42
- 2. Click on Restore 42
- 3.8 Removing a Backup File 43
- Section 4 44
- Click on Properties 45
- 2. Click on Properties 46
- Section 5 50
- (Figure 5-2) 51
- 5. Click OK (Figure 5-3) 52
- 7. Click OK (Figure 5 -4) 52
- Mask:255.255.255.0 54
- (Figure 5-9) 55
- 2. Click 59
- 2000 Users 61
- 1. Clear all fields 62
- and retain 65
- 1. Write dowm 65
- Double click 66
- Click 66
- Accessing the Controller 68
- Section 6 70
- Section 7 72
- 1. Click Use DHCP 75
- Copy Hostname 75
- 2. Click Set IP Details 75
- 3. Click to Reboot 75
- Section 8 78
- 8.2.1.3 Operator Login/Logout 84
- 8.3 Site Configuration 85
- 8.3.1 Site Name 85
- Uploading Firmware 87
- Section 9 89
- 2. Click on the backup file 91
- 3. Click on Restore 91
- 1. Click on Find Files 94
- 2. Select files 94
- 2. Click on Finish 95
- 2. Click on Upload 96
- 9.6 FTP Server Conflict 98
- ATC300-1000/2000 Teletilt 101
- Section 10 102
- Click on Start Scan 103
- Click to Close 105
- Show Statistics 105
- 10.3 Choice of Upgrade Method 106
- →Software Versions 108
- Antennas 111
- Section 11 113
- 11.3 Addressing 116
- 11.5 AISG Control Tools 118
- 11.5.1 AISG 2.0 Reset 118
- 11.5.2 Revert to AISG 1.1 119
- Multiple-Single RET 123
- Section 12 128
- Click on Edit Selected 131
- Microsoft Excel 132
- Section 13 134
- Section 14 138
- 2. Click on Add 139
- Section 15 144
- Click on Close 146
- Section 16 148
- Section 17 152
- Operating Instructions for 156
- SmartBeam 156
- Antennas 157
- Section 18 158
- Section 19 162
- Antenna 164
- Section 20 166
- New Az offset is displayed 169
- Section 21 170
- New beamwidth is displayed 173
- Section 22 174
- ATC300-1000/2000 Teletilt 177
- Mounted Amplifiers 178
- Section 23 180
- 23.3 Configuring a TMA 182
- 23.4 Changing TMA Gain 183
- Select TMA 184
- Click on Change TMA Gain 184
- (Figure 23-12) 187
- Mode, its gain value is zero 187
- Helpful Information 188
- Part 9–Helpful Information 189
- Appendix A 190
- Firewall 191
- Appendix B 192
- → Control Panel (Figure B-3) 193
- computer 195
- Appendix C 198
- C.1 Required Resources 199
- Controller 204
- Click on Manual 205
- Appendix D 209
- Meaning AISG1.0/1.1 AISG 2.0 210
- Appendix E 211
- SITE I.D 213
Inhaltsverzeichnis
Seite 1 - Installation and User Guide
ATC200-1000 & ATC300-1000/2000 Teletilt® Remote Control Variable Electrical Downtilt SystemInstallation and User GuideBulletin 639544 • Revision
Seite 2
Table of Contents ATC300-1000/2000 Teletilt® RET Systemii December 2009 Bulletin 639544 • Revision Evii August 2014 Bulletin 639544 • Revisio
Seite 3 - Revision History
Section 9–Uploading Controller Firmware Using the IP Config Tool ATC300-1000/2000 Teletilt® RET System9-12 August 2014 Bulletin 639544 • Revision
Seite 4 - ATC300-1000/2000 Teletilt
ATC300-1000/2000 Teletilt® RET System Section 9–Uploading Controller Firmware Using the IP Config ToolBulletin 639544 • Revision L August 2014 9-1
Seite 5 - Notices and Precautions
Bulletin 639544 • Revision L August 2014 10-1Section 10Uploading Device Firmware10.0 Section Overview• Andrew AISG device firmware is bundled with
Seite 6 - Figure 1. ESD Wrist Strap
Section 10–Uploading Device Firmware ATC300-1000/2000 Teletilt® RET System10-2 August 2014 Bulletin 639544 • Revision LFigure 10-2. ATC300-1000/
Seite 7
ATC300-1000/2000 Teletilt® RET System Section 10–Uploading Device FirmwareBulletin 639544 • Revision L August 2014 10-3Figure 10-3. Device Scan
Seite 8
Section 10–Uploading Device Firmware ATC300-1000/2000 Teletilt® RET System10-4 August 2014 Bulletin 639544 • Revision LFigure 10-5. Upgrade Prog
Seite 9 - Table of Contents
ATC300-1000/2000 Teletilt® RET System Section 10–Uploading Device FirmwareBulletin 639544 • Revision L August 2014 10-510.3 Choice of Upgrade Met
Seite 10 - RET System
Section 10–Uploading Device Firmware ATC300-1000/2000 Teletilt® RET System10-6 August 2014 Bulletin 639544 • Revision LFigure 10-9 Manual Upgra
Seite 11
ATC300-1000/2000 Teletilt® RET System Section 10–Uploading Device FirmwareBulletin 639544 • Revision L August 2014 10-7Figure 10-10. Selecting H
Seite 12
Section 10–Uploading Device Firmware ATC300-1000/2000 Teletilt® RET System10-8 August 2014 Bulletin 639544 • Revision LFigure 10-11. About Web P
Seite 13
ATC300-1000/2000 Teletilt® RET System Table of ContentsBulletin 639544 • Revision E December 2009 iii9.1 Required Resources ...
Seite 14
ATC300-1000/2000 Teletilt® RET System Section 10–Uploading Device FirmwareBulletin 639544 • Revision L August 2014 10-9This page is intentionally
Seite 15 - Initial Setup
Bulletin 639544 • Revision L August 2014 Part 4Device Discovery for All Types of Antennas
Seite 16
Part 4–Device Discovery for All Types of Antennas ATC300-1000/2000 Teletilt® RET System August 2014 Bulletin 639544 • Revision LThis page intenti
Seite 17 - Section 1
Bulletin 639544 • Revision L August 2014 11-1Section 11Device Discovery and Bus Management11.0 Section Overview• In order for the controller to p
Seite 18
Section 11–Device Discovery and Addressing ATC300-1000/2000 Teletilt® RET System11-2 August 2014 Bulletin 639544 • Revision L2. Click on Start Sc
Seite 19
ATC300-1000/2000 Teletilt® RET System Section 11–Device Discovery and AddressingBulletin 639544 • Revision L August 2014 11-311.2 Manually Adding
Seite 20
Section 11–Device Discovery and Addressing ATC300-1000/2000 Teletilt® RET System11-4 August 2014 Bulletin 639544 • Revision L11.3 AddressingNew d
Seite 21
ATC300-1000/2000 Teletilt® RET System Section 11–Device Discovery and AddressingBulletin 639544 • Revision L August 2014 11-5Figure 11-5. Removi
Seite 22 - Power Connections:
Section 11–Device Discovery and Addressing ATC300-1000/2000 Teletilt® RET System11-6 August 2014 Bulletin 639544 • Revision LFigure 11-7. AISG C
Seite 23 - Suspend/Wake Modes
ATC300-1000/2000 Teletilt® RET System Section 11–Device Discovery and AddressingBulletin 639544 • Revision L August 2014 11-711.5.2 Revert to AIS
Seite 24
Table of Contents ATC300-1000/2000 Teletilt® RET Systemiv December 2009 Bulletin 639544 • Revision Eiv July 2008 Bulletin 639544 • Revision B
Seite 25
Section 11–Device Discovery and Addressing ATC300-1000/2000 Teletilt® RET System11-8 August 2014 Bulletin 639544 • Revision LFigure 11-9. Device
Seite 26 - 1.3 Actuator (Motor Drive)
ATC300-1000/2000 Teletilt® RET System Section 11–Device Discovery and AddressingBulletin 639544 • Revision L August 2014 11-9Figure 11-10. Andrew
Seite 27 - 1.5 Lightning Protection Unit
Section 11–Device Discovery and Addressing ATC300-1000/2000 Teletilt® RET System11-10 August 2014 Bulletin 639544 • Revision LFigure 11-11. Optio
Seite 28 - Features/benefits include:
ATC300-1000/2000 Teletilt® RET System Section 11–Device Discovery and AddressingBulletin 639544 • Revision L August 2014 11-11Figure 11-13. Succe
Seite 29
Section 11–Device Discovery and Addressing ATC300-1000/2000 Teletilt® RET System11-12 August 2014 Bulletin 639544 • Revision L11.6.2 Set AITM(s)
Seite 30 - Section 2
ATC300-1000/2000 Teletilt® RET System Section 11–Device Discovery and AddressingBulletin 639544 • Revision L August 2014 11-13This page intention
Seite 31 - Chassis Grounding Connection
Bulletin 639544 • Revision L August 2014 Part 5Operating Instructions for Standard Antennas with Attached Actuators
Seite 32 - 2.5 Controller Chassis Power
Part 5–Operating Instructions for Standard Antennas with Attached Actuators ATC300-1000/2000 Teletilt® RET System August 2014 Bulletin 639544 •
Seite 33
Bulletin 639544 • Revision L August 2014 12-1Section 12Device Configuration12.0 Section OverviewBefore the controller can successfully send comman
Seite 34 - Section 3
Section 12–Device Configuration ATC300-1000/2000 Teletilt® RET System12-2 August 2014 Bulletin 639544 • Revision LNotice that the ID for the devic
Seite 35 - (Figure 3-1)
ATC300-1000/2000 Teletilt® RET System Table of ContentsBulletin 639544 • Revision L August 2014 x22.1 Adjusting the Downtilt Angle, Az Offset, or
Seite 36 - Figure 3-2
ATC300-1000/2000 Teletilt® RET System Section 12–Device ConfigurationBulletin 639544 • Revision L August 2014 12-3 Factory installed actuators ar
Seite 37 - 1. Click on New IP Info tab
Section 12–Device Configuration ATC300-1000/2000 Teletilt® RET System12-4 August 2014 Bulletin 639544 • Revision L To verify that each item config
Seite 38
ATC300-1000/2000 Teletilt® RET System Section 12–Device ConfigurationBulletin 639544 • Revision L August 2014 12-512.3 Saving a Device Configurati
Seite 39
Section 12–Device Configuration ATC300-1000/2000 Teletilt® RET System12-6 August 2014 Bulletin 639544 • Revision LThis page intentionally left bla
Seite 40 - New IP backup file shown
Bulletin 639544 • Revision L August 2014 13-1Section 13Adjusting the Electrical Downtilt on a Single Antenna13.0 Section Overview• The electrical
Seite 41 - 1. Click on Close
Section 13–Adjusting the Electrical Downtilt on a Single Antenna ATC300-1000/2000 Teletilt® RET System13-2 August 2014 Bulletin 639544 • Revision
Seite 42 - 2. Click on Restore
ATC300-1000/2000 Teletilt® RET System Section 13–Adjusting the Electrical Downtilt on a Single AntennaBulletin 639544 • Revision L August 2014 13
Seite 43 - 3.8 Removing a Backup File
Section 13–Adjusting the Electrical Downtilt on a Single Antenna ATC300-1000/2000 Teletilt® RET System13-4 August 2014 Bulletin 639544 • Revision
Seite 44 - Section 4
Bulletin 639544 • Revision L August 2014 14-1Section 14Adjusting the Electrical Downtilt on a Group of Antennas14.0 Section OverviewIn addition to
Seite 45 - Click on Properties
Section 14–Adjusting the Electrical Downtilt on a Group of Antennas ATC300-1000/2000 Teletilt® RET System14-2 August 2014 Bulletin 639544 • Revis
Seite 46 - 2. Click on Properties
Table of Contents ATC300-1000/2000 Teletilt® RET Systemxi August 2014 Bulletin 639544 • Revision LThis page intentionally left blank.
Seite 47
ATC300-1000/2000 Teletilt® RET System Section 14–Adjusting the Electrical Downtilt on a Group of AntennasBulletin 639544 • Revision L August 2014
Seite 48
Section 14–Adjusting the Electrical Downtilt on a Group of Antennas ATC300-1000/2000 Teletilt® RET System14-4 August 2014 Bulletin 639544 • Revis
Seite 49
Bulletin 639544 • Revision L August 2014 Part 6Operating Instructions for Antennas with Multiple Integrated Actuators
Seite 50 - Section 5
Part 6–Operating Antennas with Multiple Integrating Actuators August 2014 Bulletin 639544 • Revision LATC300-1000/2000 Teletilt® RET SystemThis p
Seite 51 - (Figure 5-2)
Bulletin 639544 • Revision L August 2014 15-1Section 15Device Configuration for Antennas with Multiple Integrated Actuators15.0 Section OverviewBe
Seite 52 - 7. Click OK (Figure 5 -4)
Section 15–Device Configuration-Multiple Integrated Actuators ATC300-1000/2000 Teletilt® RET System15-2 August 2014 Bulletin 639544 • Revision LNo
Seite 53
ATC300-1000/2000 Teletilt® RET System Section 15–Device Configuration-Multiple Integrated ActuatorsBulletin 639544 • Revision L August 2014 15-3 •
Seite 54 - Mask:255.255.255.0
Section 15–Device Configuration-Multiple Integrated Actuators ATC300-1000/2000 Teletilt® RET System15-4 August 2014 Bulletin 639544 • Revision L7.
Seite 55 - (Figure 5-9)
Bulletin 639544 • Revision L August 2014 16-1Section 16Adjusting the Electrical Downtilt on a Single Antenna Equipped With Multiple Integrated Act
Seite 56
16-2 August 2014 Bulletin 639544 • Revision LSection 16–Adjusting Electrical Downtilt-Single Multiple Integrated Actuators ATC300-1000/2000 T
Seite 57
Bulletin 639544 • Revision L August 2014 Part 1Initial Setup
Seite 58
Bulletin 639544 • Revision L August 2014 16-3ATC300-1000/2000 Teletilt® RET System Section 16–Adjusting Electrical Downtilt-Single Multiple Integr
Seite 59 - 2. Click
16-4 August 2014 Bulletin 639544 • Revision LSection 16–Adjusting Electrical Downtilt-Single Multiple Integrated Actuators ATC300-1000/2000 T
Seite 60
Bulletin 639544 • Revision L August 2014 17-1Section 17Adjusting the Electrical Downtilt on a Group of Antennas Equipped with Multiple Integrated
Seite 61 - 2000 Users
Section 17–Adjusting Downtilt-Group of Multiple Integrated Actuators ATC300-1000/2000 Teletilt® RET System17-2 August 2014 Bulletin 639544 • Revi
Seite 62 - 1. Clear all fields
ATC300-1000/2000 Teletilt® RET System Section 17–Adjusting Downtilt-Group of Multiple Integrated ActuatorsBulletin 639544 • Revision L August 2014
Seite 63
Section 17–Adjusting Downtilt-Group of Multiple Integrated Actuators ATC300-1000/2000 Teletilt® RET System17-4 August 2014 Bulletin 639544 • Revi
Seite 64
Bulletin 639544 • Revision L August 2014 Part 7Operating Instructions for SmartBeam® Antennas
Seite 65 - 1. Write dowm
Part 7–Operating Instructions for SmartBeam® Antennas August 2014 Bulletin 639544 • Revision LATC300-1000/2000 Teletilt® RET SystemThis page inte
Seite 66 - Click
Bulletin 639544 • Revision L August 2014 18-1Section 18Device Configuration with SmartBeam® Antennas18.0 Section OverviewBefore the controller can
Seite 67
Section 18–Device Configuration with SmartBeam® Antennas ATC300-1000/2000 Teletilt® RET System18-2 August 2014 Bulletin 639544 • Revision LNotice
Seite 68 - Accessing the Controller
Part 1–Initial Setup ATC300-1000/2000 Teletilt® RET System August 2014 Bulletin 639544 • Revision LThis page intentionally left blank.
Seite 69
ATC300-1000/2000 Teletilt® RET System Section 18–Device Configuration with SmartBeam® AntennasBulletin 639544 • Revision L August 2014 18-3 No s
Seite 70 - Section 6
Section 18–Device Configuration with SmartBeam® Antennas ATC300-1000/2000 Teletilt® RET System18-4 August 2014 Bulletin 639544 • Revision L6. Cli
Seite 71
Bulletin 639544 • Revision L August 2014 19-1Section 19Adjusting the Electrical Downtilt on a Single SmartBeam® Antenna19.0 Section Overview• The
Seite 72 - Section 7
Section 19–Adjusting Electrical Downtilt-Single SmartBeam® Antenna ATC300-1000/2000 Teletilt® RET System19-2 August 2014 Bulletin 639544 • Revis
Seite 73
ATC300-1000/2000 Teletilt® RET System Section 19–Adjusting Electrical Downtilt-Single SmartBeam® AntennaBulletin 639544 • Revision L August 2014
Seite 74
Section 19–Adjusting Electrical Downtilt-Single SmartBeam® Antenna ATC300-1000/2000 Teletilt® RET System19-4 August 2014 Bulletin 639544 • Revis
Seite 75 - 3. Click to Reboot
Bulletin 639544 • Revision L August 2014 20-1Section 20Adjusting the Pan on a Single SmartBeam® Antenna20.0 Section Overview• The azimuth offset
Seite 76
Section 20–Adjusting Pan-Single SmartBeam® Antenna ATC300-1000/2000 Teletilt® RET System20-2 August 2014 Bulletin 639544 • Revision LThe Pan Axi
Seite 77
ATC300-1000/2000 Teletilt® RET System Section 20–Adjusting Pan-Single SmartBeam® AntennaBulletin 639544 • Revision L August 2014 20-35. A progr
Seite 78 - Section 8
Section 20–Adjusting Pan-Single SmartBeam® Antenna ATC300-1000/2000 Teletilt® RET System20-4 August 2014 Bulletin 639544 • Revision LFigure 20-4
Seite 79
Section 1System Description1.0 Section OverviewThis section discusses the use of components used in the ATC300-1000/2000 or ATC 200-1000 Teletilt® sys
Seite 80
Bulletin 639544 • Revision L August 2014 21-1Section 21Adjusting the Fan on a Single SmartBeam® Antenna21.0 Section Overview• The beamwidth may b
Seite 81
Section 21–Adjusting Fan-Single SmartBeam® Antenna ATC300-1000/2000 Teletilt® RET System21-2 August 2014 Bulletin 639544 • Revision LThe Fan Axi
Seite 82
ATC300-1000/2000 Teletilt® RET System Section 21–Adjusting Fan-Single SmartBeam® AntennaBulletin 639544 • Revision L August 2014 21-35. A progr
Seite 83
Section 21–Adjusting Fan-Single SmartBeam® Antenna ATC300-1000/2000 Teletilt® RET System21-4 August 2014 Bulletin 639544 • Revision LFigure 21-4
Seite 84 - 8.2.1.3 Operator Login/Logout
Bulletin 639544 • Revision L August 2014 22-1Section 22Adjusting the Electrical Downtilt, Pan, or Fan on a Group of SmartBeam® Antennas22.0 Sectio
Seite 85 - 8.3.1 Site Name
Section 22–Adjusting Electrical Downtilt, Pan, Fan-Group SmartBeam® Antennas ATC300-1000/2000 Teletilt® RET System22-2 August 2014 Bulletin 639544
Seite 86
ATC300-1000/2000 Teletilt® RET System Section 22–Adjusting Electrical Downtilt, Pan, Fan-Group SmartBeam® AntennasBulletin 639544 • Revision L Aug
Seite 87 - Uploading Firmware
Section 22–Adjusting Electrical Downtilt, Pan, Fan-Group SmartBeam® Antennas ATC300-1000/2000 Teletilt® RET System22-4 August 2014 Bulletin 639544
Seite 88
Bulletin 639544 • Revision L August 2014 Part 8Operating Instructions for Tower Mounted Amplifiers
Seite 89 - Section 9
Part 8–Operating Instructions for Tower Mounted Amplifiers August 2014 Bulletin 639544 • Revision LATC300-1000/2000 Teletilt® RET SystemThis page
Seite 90
Section 1–System Description ATC300-1000/2000 Teletilt® RET System1-2 August 2014 Bulletin 639544 • Revision LBenefits:• Independently manages up
Seite 91 - 3. Click on Restore
Bulletin 639544 • Revision L August 2014 23-1Section 23Tower Mounted Amplifier23.0 Section OverviewAndrew tower mounted amplifiers (TMAs) are insta
Seite 92
Section 23–Tower Mounted Amplifier ATC300-1000/2000 Teletilt® RET System23-2 August 2014 Bulletin 639544 • Revision LFigure 23-2. Device Scan fin
Seite 93
ATC300-1000/2000 Teletilt® RET System Section 23–Tower Mounted AmplifierBulletin 639544 • Revision L August 2014 23-3Figure 23-3. ATC300 Controll
Seite 94 - 2. Select files
Section 23–Tower Mounted Amplifier ATC300-1000/2000 Teletilt® RET System23-4 August 2014 Bulletin 639544 • Revision L23.4 Changing TMA GainTo chan
Seite 95 - 2. Click on Finish
ATC300-1000/2000 Teletilt® RET System Section 23–Tower Mounted AmplifierBulletin 639544 • Revision L August 2014 23-5To change the gain on a varia
Seite 96 - 2. Click on Upload
Section 23–Tower Mounted Amplifier ATC300-1000/2000 Teletilt® RET System23-6 August 2014 Bulletin 639544 • Revision LAfter the TMA has changed its
Seite 97
ATC300-1000/2000 Teletilt® RET System Section 23–Tower Mounted AmplifierBulletin 639544 • Revision L August 2014 23-723.5 Changing TMA Operating M
Seite 98 - 9.6 FTP Server Conflict
Section 23–Tower Mounted Amplifier ATC300-1000/2000 Teletilt® RET System23-8 August 2014 Bulletin 639544 • Revision LAfter the TMA has changed its
Seite 99
Bulletin 639544 • Revision L August 2014 Part 9Helpful Information
Seite 100
Part 9–Helpful Information August 2014 Bulletin 639544 • Revision LATC300-1000/2000 Teletilt® RET SystemThis page intentionally left blank.
Seite 101 - ATC300-1000/2000 Teletilt
ATC300-1000/2000 Teletilt® RET System Section 1–System DescriptionBulletin 639544 • Revision L August 2014 1-3Figure 1-2. ATC300-1000/2000 Statu
Seite 102 - Section 10
Appendix ADisabling and Enabling the Windows® XP SP2 FirewallA.0 Appendix Overview• A firewall may block the use of an FTP server, which is needed for
Seite 103 - Click on Start Scan
Appendix A–Disabling/Enabling Windows® XP SP2 Firewall ATC300-1000/2000 Teletilt® RET SystemA-2 August 2014 Bulletin 639544 • Revision L4. Select
Seite 104
Bulletin 639544 • Revision L August 2014 B-1Appendix BIP AddressingB.0 Appendix Overview• In order for the ATC300/200 controller to communicate w
Seite 105 - Show Statistics
Appendix B–IP Addressing ATC300-1000/2000 Teletilt® RET SystemB-2 August 2014 Bulletin 639544 • Revision Lin Figure B-2. Notes:• Generally, the
Seite 106 - 10.3 Choice of Upgrade Method
ATC300-1000/2000 Teletilt® RET System Appendix B–IP AddressingBulletin 639544 • Revision L August 2014 B-3Figure B-4. Selecting Network and Shar
Seite 107
Appendix B–IP Addressing ATC300-1000/2000 Teletilt® RET SystemB-4 August 2014 Bulletin 639544 • Revision LFigure B-6. Selecting Local Area Conne
Seite 108 - →Software Versions
ATC300-1000/2000 Teletilt® RET System Appendix B–IP AddressingBulletin 639544 • Revision L August 2014 B-5Figure B-11. Local Area Connection Pro
Seite 109
Appendix B–IP Addressing ATC300-1000/2000 Teletilt® RET SystemB-6 August 2014 Bulletin 639544 • Revision LFrom your desk top, open I13. nternet
Seite 110
Bulletin 639544 • Revision L August 2014 C-1Appendix CUploading the Firmware ManuallyC.0 Section Overview• The screens shown in this section are
Seite 111 - Antennas
Appendix C–Uploading Firmware Manually ATC300-1000/2000 Teletilt® RET SystemC-2 August 2014 Bulletin 639544 • Revision LC.1 Required ResourcesHar
Seite 113 - Section 11
Section 1–System Description ATC300-1000/2000 Teletilt® RET System1-4 August 2014 Bulletin 639544 • Revision LPort Details:Figures 1-3 through 1-
Seite 114
ATC300-1000/2000 Teletilt® RET System Appendix C–Uploading Firmware ManuallyBulletin 639544 • Revision L August 2014 C-31. Create a new user nam
Seite 115
Appendix C–Uploading Firmware Manually ATC300-1000/2000 Teletilt® RET SystemC-4 August 2014 Bulletin 639544 • Revision LC.3 Uploading the Firmwar
Seite 116 - 11.3 Addressing
ATC300-1000/2000 Teletilt® RET System Appendix C–Uploading Firmware ManuallyBulletin 639544 • Revision L August 2014 C-5(ATC200 and ATC300 2.32 a
Seite 117
Appendix C–Uploading Firmware Manually ATC300-1000/2000 Teletilt® RET SystemC-6 August 2014 Bulletin 639544 • Revision LNote that this IP address
Seite 118 - 11.5.1 AISG 2.0 Reset
ATC300-1000/2000 Teletilt® RET System Appendix C–Uploading Firmware ManuallyBulletin 639544 • Revision L August 2014 C-7C.4 Uploading Firmware t
Seite 119 - 11.5.2 Revert to AISG 1.1
Appendix C–Uploading Firmware Manually ATC300-1000/2000 Teletilt® RET SystemC-8 August 2014 Bulletin 639544 • Revision L4. Click on the check bo
Seite 120
ATC300-1000/2000 Teletilt® RET System Appendix C–Uploading Firmware ManuallyBulletin 639544 • Revision L August 2014 C-9Figure C-8a. Manual Firmw
Seite 121
Appendix C–Uploading Firmware Manually ATC300-1000/2000 Teletilt® RET SystemC-10 August 2014 Bulletin 639544 • Revision LFigure C-9. Firmware Ver
Seite 122
ATC300-1000/2000 Teletilt® RET System Appendix C–Uploading Firmware ManuallyBulletin 639544 • Revision L August 2014 C-11This page intentionally
Seite 123 - Multiple-Single RET
Bulletin 639544 • Revision L August 2014 D-1D.0 Relay Alarm Definitions Table Major alarms that may be reported by a device are detailed in Tabl
Seite 124
ATC300-1000/2000 Teletilt® RET System Section 1–System DescriptionBulletin 639544 • Revision L August 2014 1-5Figure 1-5. ATC300-1000/2000 SMB P
Seite 125
Appendix D–Relay Alarms ATC300-1000/2000 Teletilt® RET SystemD-2 August 2014 Bulletin 639544 • Revision LMeaning AISG1.0/1.1 AISG 2.0Actuator Det
Seite 126
Bulletin 639544 • Revision L August 2014 E-1Appendix EDeclaration of Compliance/2000
Seite 127
Appendix E–Declaration of Compliance ATC300-1000/2000 Teletilt® RET SystemE-2 August 2014 Bulletin 639544 • Revision L
Seite 128 - Section 12
Teletilt® System Site Configuration Worksheet SITE I.D. Actuator Antenna Actuator Serial No. Sector/Orientation Height Miscellaneous 12345
Seite 129
Teletilt® System Site Configuration Worksheet SITE I.D. Actuator Antenna Actuator Serial No. Sector/Orientation Height Miscellaneous 17181
Seite 130
Section 1–System Description ATC300-1000/2000 Teletilt® RET System1-6 August 2014 Bulletin 639544 • Revision LPower Connections:The ATC300-1000/2
Seite 131 - Click on Edit Selected
ATC300-1000/2000 Teletilt® RET System Section 1–System DescriptionBulletin 639544 • Revision L August 2014 1-7Bus Power: Suspend/Wake ModesThe co
Seite 132 - Microsoft Excel
Section 1–System Description ATC300-1000/2000 Teletilt® RET System1-8 August 2014 Bulletin 639544 • Revision LAlarm Outputs:The ATC300-1000/2000
Seite 133
ATC300-1000/2000 Teletilt® RET System Section 1–System DescriptionBulletin 639544 • Revision L August 2014 1-9When a short has been detected and
Seite 134 - Section 13
Section 1–System Description ATC300-1000/2000 Teletilt® RET System1-10 August 2014 Bulletin 639544 • Revision L1.3 Actuator (Motor Drive)The ATM2
Seite 135
ATC300-1000/2000 Teletilt® RET System Section 1–System DescriptionBulletin 639544 • Revision L August 2014 1-111.4 Junction BoxesJunction boxes a
Seite 136
Section 1–System Description ATC300-1000/2000 Teletilt® RET System1-12 August 2014 Bulletin 639544 • Revision L1.6 Low Voltage Cable Assemblies(A
Seite 137
ATC300-1000/2000 Teletilt® RET System Section 1–System DescriptionBulletin 639544 • Revision L August 2014 1-13This page intentionally left blank
Seite 138 - Section 14
ATC300-1000/2000 Teletilt® RET System ATC300-1000/2000 Teletilt® RET System Bulletin 639544 • Revision L August 2014 iRevision HistoryRevision No.
Seite 139 - 2. Click on Add
Section 2Installation Instructions and Safety Precautions2.0 Section OverviewThis section covers installation procedures for mounting and grounding th
Seite 140
Section 2–Installation Instructions and Safety Precautions ATC300-1000/2000 Teletilt® RET System2-2 August 2014 Bulletin 639544 • Revision LFigur
Seite 141
ATC300-1000/2000 Teletilt® RET System Section 2–Installation Instructions and Safety PrecautionsBulletin 639544 • Revision L August 2014 2-32.5 C
Seite 142
Section 2–Installation Instructions and Safety Precautions ATC300-1000/2000 Teletilt® RET System2-4 August 2014 Bulletin 639544 • Revision LConne
Seite 143
Bulletin 639544 • Revision L August 2014 3-1Section 3Changing IP Settings on the Local Computer Using the IP Config Tool3.0 Section Overview• In
Seite 144 - Section 15
Section 3–Changing IP Settings on the Local PC Using the IP Config Tool ATC300-1000/2000 Teletilt® RET System3-2 August 2014 Bulletin 639544 • Rev
Seite 145
ATC300-1000/2000 Teletilt® RET System Section 3–Changing IP Settings on the Local PC Using the IP Config ToolBulletin 639544 • Revision L August 20
Seite 146 - Click on Close
Section 3–Changing IP Settings on the Local PC Using the IP Config Tool ATC300-1000/2000 Teletilt® RET System3-4 August 2014 Bulletin 639544 • Rev
Seite 147
ATC300-1000/2000 Teletilt® RET System Section 3–Changing IP Settings on the Local PC Using the IP Config ToolBulletin 639544 • Revision L August 20
Seite 148 - Section 16
Section 3–Changing IP Settings on the Local PC Using the IP Config Tool ATC300-1000/2000 Teletilt® RET System3-6 August 2014 Bulletin 639544 • Rev
Seite 149
ii August 2014 Bulletin 639544 • Revision L ATC300-1000/2000 Teletilt® RET SystemRevision No. Date Description of ChangesJ December 2012 Change A
Seite 150
ATC300-1000/2000 Teletilt® RET System Section 3–Changing IP Settings on the Local PC Using the IP Config ToolBulletin 639544 • Revision L August 20
Seite 151
Section 3–Changing IP Settings on the Local PC Using the IP Config Tool ATC300-1000/2000 Teletilt® RET System3-8 August 2014 Bulletin 639544 • Rev
Seite 152 - Section 17
ATC300-1000/2000 Teletilt® RET System Section 3–Changing IP Settings on the Local PC Using the IP Config ToolBulletin 639544 • Revision L August 20
Seite 153
Section 3–Changing IP Settings on the Local PC Using the IP Config Tool ATC300-1000/2000 Teletilt® RET System3-10 August 2014 Bulletin 639544 • Re
Seite 154
Section 4Changing IP Settings on the Local Computer Manually4.0 Section Overview• In order for a local computer to gain access to the ATC300-1000/200
Seite 155
Section 4–Changing IP Settings on the Local Computer Manually ATC300-1000/2000 Teletilt® RET System4-2 August 2014 Bulletin 639544 • Revision L4.
Seite 156 - SmartBeam
ATC300-1000/2000 Teletilt® RET System Section 4–Changing IP Settings on the Local Computer ManuallyBulletin 639544 • Revision L August 2014 4-34.
Seite 157 - Antennas
Section 4–Changing IP Settings on the Local Computer Manually ATC300-1000/2000 Teletilt® RET System4-4 August 2014 Bulletin 639544 • Revision L6.
Seite 158 - Section 18
ATC300-1000/2000 Teletilt® RET System Section 4–Changing IP Settings on the Local Computer ManuallyBulletin 639544 • Revision L August 2014 4-58.
Seite 159
Section 4–Changing IP Settings on the Local Computer Manually ATC300-1000/2000 Teletilt® RET System4-6 August 2014 Bulletin 639544 • Revision L4.
Seite 160
Bulletin 639544 • Revision L August 2014 iiiATC300-1000/2000 Teletilt® RET System Do not install near power lines. Power lines, telephone lines, a
Seite 161
Section 5Obtaining IP Settings for the Controller (When IP is Unknown)5.0 Section Overview• If IP addressing has been changed on the controller and i
Seite 162 - Section 19
Section 5–Obtaining IP Settings for Controller (When IP is Unknown) ATC300-1000/2000 Teletilt® RET System5-2 August 2014 Bulletin 639544 • Revisi
Seite 163
ATC300-1000/2000 Teletilt® RET System Section 5–Obtaining IP Settings for Controller (When IP is Unknown)Bulletin 639544 • Revision L August 2014
Seite 164 - Antenna
Section 5–Obtaining IP Settings for Controller (When IP is Unknown) ATC300-1000/2000 Teletilt® RET System5-4 August 2014 Bulletin 639544 • Revisi
Seite 165
ATC300-1000/2000 Teletilt® RET System Section 5–Obtaining IP Settings for Controller (When IP is Unknown)Bulletin 639544 • Revision L August 2014
Seite 166 - Section 20
Section 5–Obtaining IP Settings for Controller (When IP is Unknown) ATC300-1000/2000 Teletilt® RET System5-6 August 2014 Bulletin 639544 • Revisi
Seite 167
ATC300-1000/2000 Teletilt® RET System Section 5–Obtaining IP Settings for Controller (When IP is Unknown)Bulletin 639544 • Revision L August 2014
Seite 168
Section 5–Obtaining IP Settings for Controller (When IP is Unknown) ATC300-1000/2000 Teletilt® RET System5-8 August 2014 Bulletin 639544 • Revisi
Seite 169 - New Az offset is displayed
ATC300-1000/2000 Teletilt® RET System Section 5–Obtaining IP Settings for Controller (When IP is Unknown)Bulletin 639544 • Revision L August 2014
Seite 170 - Section 21
Section 5–Obtaining IP Settings for Controller (When IP is Unknown) ATC300-1000/2000 Teletilt® RET System5-10 August 2014 Bulletin 639544 • Revis
Seite 171
iv August 2014 Bulletin 639544 • Revision L ATC300-1000/2000 Teletilt® RET SystemElectric Static Discharge (ESD) can damage or destroy the hardw
Seite 172
ATC300-1000/2000 Teletilt® RET System Section 5–Obtaining IP Settings for Controller (When IP is Unknown)Bulletin 639544 • Revision L August 2014
Seite 173 - New beamwidth is displayed
Section 5–Obtaining IP Settings for Controller (When IP is Unknown) ATC300-1000/2000 Teletilt® RET System5-12 August 2014 Bulletin 639544 • Revis
Seite 174 - Section 22
ATC300-1000/2000 Teletilt® RET System Section 5–Obtaining IP Settings for Controller (When IP is Unknown)Bulletin 639544 • Revision L August 2014
Seite 175
Section 5–Obtaining IP Settings for Controller (When IP is Unknown) ATC300-1000/2000 Teletilt® RET System5-14 August 2014 Bulletin 639544 • Revis
Seite 176
ATC300-1000/2000 Teletilt® RET System Section 5–Obtaining IP Settings for Controller (When IP is Unknown)Bulletin 639544 • Revision L August 2014
Seite 177 - ATC300-1000/2000 Teletilt
Section 5–Obtaining IP Settings for Controller (When IP is Unknown) ATC300-1000/2000 Teletilt® RET System5-16 August 2014 Bulletin 639544 • Revis
Seite 178 - Mounted Amplifiers
ATC300-1000/2000 Teletilt® RET System Section 5–Obtaining IP Settings for Controller (When IP is Unknown)Bulletin 639544 • Revision L August 2014
Seite 179
Section 5–Obtaining IP Settings for Controller (When IP is Unknown) ATC300-1000/2000 Teletilt® RET System5-18 August 2014 Bulletin 639544 • Revis
Seite 180 - Section 23
Bulletin 639544 • Revision L August 2014 Part 2Accessing the Controller
Seite 181
Part 2–Accessing the Controller ATC300-1000/2000 Teletilt® RET System August 2014 Bulletin 639544 • Revision LThis page intentionally left blank.
Seite 182 - 23.3 Configuring a TMA
Bulletin 639544 • Revision L August 2014 vATC300-1000/2000 Teletilt® RET System 6. When removing or replacing ESDS equipment, hold the device or
Seite 183 - 23.4 Changing TMA Gain
Bulletin 639544 • Revision L August 2014 6-1Section 6Accessing the Controller Using a Direct Ethernet Connection6.0 Section OverviewThe ATC300-100
Seite 184 - Click on Change TMA Gain
Section 6–Accessing the Controller Using a Direct Ethernet Connection ATC300-1000/2000 Teletilt® RET System6-2 August 2014 Bulletin 639544 • Revi
Seite 185
Bulletin 639544 • Revision L August 2014 7-1Section 7Changing the Controller’s IP Settings for Access Over a Network7.0 Section Overview• The ATC
Seite 186
7-2 August 2014 Bulletin 639544 • Revision LSection 7–Changing the Controller’s IP Settings for Access Over a Network ATC300-1000/2000 Te
Seite 187 - Mode, its gain value is zero
ATC300-1000/2000 Teletilt® RET System Section 7–Changing the Controller’s IP Settings for Access Over a NetworkBulletin 639544 • Revision L
Seite 188 - Helpful Information
7-4 August 2014 Bulletin 639544 • Revision LSection 7–Changing the Controller’s IP Settings for Access Over a Network ATC300-1000/2000 Te
Seite 189 - Part 9–Helpful Information
ATC300-1000/2000 Teletilt® RET System Section 7–Changing the Controller’s IP Settings for Access Over a NetworkBulletin 639544 • Revision L
Seite 190 - Appendix A
7-6 August 2014 Bulletin 639544 • Revision LSection 7–Changing the Controller’s IP Settings for Access Over a Network ATC300-1000/2000 Te
Seite 191 - Firewall
Bulletin 639544 • Revision L August 2014 8-1Section 8Controller Configuration Options8.0 Section Overview• The ATC300/200 controller is equipped
Seite 192 - Appendix B
Section 8–Configuring the Controller to Connect Over an SNMP Manager ATC300-1000/2000 Teletilt® RET System8-2 August 2014 Bulletin 639544 • Revisi
Seite 193 - → Control Panel (Figure B-3)
vi August 2014 Bulletin 639544 • Revision L ATC300-1000/2000 Teletilt® RET SystemThis page intentionally left blank.
Seite 194
ATC300-1000/2000 Teletilt® RET System Section 8–Configuring the Controller to Connect Over an SNMP ManagerBulletin 639544 • Revision L August 2014
Seite 195 - computer
Section 8–Configuring the Controller to Connect Over an SNMP Manager ATC300-1000/2000 Teletilt® RET System8-4 August 2014 Bulletin 639544 • Revisi
Seite 196
ATC300-1000/2000 Teletilt® RET System Section 8–Configuring the Controller to Connect Over an SNMP ManagerBulletin 639544 • Revision L August 2014
Seite 197
Section 8–Configuring the Controller to Connect Over an SNMP Manager ATC300-1000/2000 Teletilt® RET System8-6 August 2014 Bulletin 639544 • Revisi
Seite 198 - Appendix C
ATC300-1000/2000 Teletilt® RET System Section 8–Configuring the Controller to Connect Over an SNMP ManagerBulletin 639544 • Revision L August 2014
Seite 199 - C.1 Required Resources
Section 8–Configuring the Controller to Connect Over an SNMP Manager ATC300-1000/2000 Teletilt® RET System8-8 August 2014 Bulletin 639544 • Revisi
Seite 200
ATC300-1000/2000 Teletilt® RET System Section 8–Configuring the Controller to Connect Over an SNMP ManagerBulletin 639544 • Revision L August 2014
Seite 201
Bulletin 639544 • Revision L August 2014 Part 3Uploading Firmware
Seite 202
Part 3–Uploading Firmware ATC300-1000/2000 Teletilt® RET System August 2014 Bulletin 639544 • Revision LThis page intentionally left blank.
Seite 203
Bulletin 639544 • Revision L August 2014 9-1Section 9Uploading Controller Firmware and Antenna Definition Files Using the IP Config Tool9.0 Sect
Seite 204 - Controller
Bulletin 639544 • Revision L August 2014 viTable of ContentsRevision History ...
Seite 205 - Click on Manual
Section 9–Uploading Controller Firmware Using the IP Config Tool ATC300-1000/2000 Teletilt® RET System9-2 August 2014 Bulletin 639544 • Revision L
Seite 206
ATC300-1000/2000 Teletilt® RET System Section 9–Uploading Controller Firmware Using the IP Config ToolBulletin 639544 • Revision L August 2014 9-3
Seite 207
Section 9–Uploading Controller Firmware Using the IP Config Tool ATC300-1000/2000 Teletilt® RET System9-4 August 2014 Bulletin 639544 • Revision L
Seite 208
ATC300-1000/2000 Teletilt® RET System Section 9–Uploading Controller Firmware Using the IP Config ToolBulletin 639544 • Revision L August 2014 9-5
Seite 209 - Appendix D
Section 9–Uploading Controller Firmware Using the IP Config Tool ATC300-1000/2000 Teletilt® RET System9-6 August 2014 Bulletin 639544 • Revision L
Seite 210 - Meaning AISG1.0/1.1 AISG 2.0
ATC300-1000/2000 Teletilt® RET System Section 9–Uploading Controller Firmware Using the IP Config ToolBulletin 639544 • Revision L August 2014 9-7
Seite 211 - Appendix E
Section 9–Uploading Controller Firmware Using the IP Config Tool ATC300-1000/2000 Teletilt® RET System9-8 August 2014 Bulletin 639544 • Revision L
Seite 212
ATC300-1000/2000 Teletilt® RET System Section 9–Uploading Controller Firmware Using the IP Config ToolBulletin 639544 • Revision L August 2014 9-9
Seite 213 - SITE I.D
Section 9–Uploading Controller Firmware Using the IP Config Tool ATC300-1000/2000 Teletilt® RET System9-10 August 2014 Bulletin 639544 • Revision
Seite 214
ATC300-1000/2000 Teletilt® RET System Section 9–Uploading Controller Firmware Using the IP Config ToolBulletin 639544 • Revision L August 2014 9-1
Weitere Dokumente für Kommunikation CommScope ATC300-2000
Commscope ATC300-2000 Bedienungsanleitung
(7 Seiten)
Commscope ATC300-2000 Bedienungsanleitung
(8 Seiten)
Verwandte Produkte und Handbücher für Kommunikation Commscope ATC300-2000
(66 Seiten)
(72 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.087 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern